The is  Alpha version 2.0.13 of the HAM
replacement for KPG5D.

This program is used to allow the
Kenwood TK-931 mobile to be used
on the 902 to 927 MHz HAM band with
12 and 25 MHz repeater splits.

This program supports all features
of the Kenwood program in Conventional 
mode (Non Trunking)

Additional features: (current Alpha)

Direct Frequency Entry (no channel numbers)

Repeater split between 1 and 39 MHz
Note: The TK-931 will ONLY support
one repeater split. Be careful, you
can program the radio to transmit
out of the HAM band.

Export your data to a .CSV file
so you can modify and print
the data with a Spread Sheet
program.

Auto Name the groups based on the
frequencys entered.

Force Name the groups based on the
frequencies entered.

Force Clear the names of the groups.

Additional features to be added
in the next Alpha:

Inport a .CSV file from a Spread Sheet
program.

hold down the "A" key while powering up 
 
then release "A" key after bout 2 seconds. 
 
this puts unit in to the program mode. 
( you should see 2  "- -" or "Progam" 
in display depending on model)
 
program using software 
 
when done programming power cycle unit to use. 


Please help us test and improve the program.
send feedback to: szingman@informx.com